Ta yaya masu bincike suke kwashewa don wanke kwalabe da jita-jita bayan jikewa a cikin dakin gwaje-gwaje na kusan awa 10 a rana?

cvfgb

Hoton da ke sama bincike ne na kididdiga na adadin lokacin da masu bincike suka kashe a cikin dakin gwaje-gwaje. Daga cikin su, 70% na lokacin da aka kashe don yin gwaje-gwaje, karanta wallafe-wallafe, da rubuta rahotanni a cikin dakin gwaje-gwaje ya fi sa'o'i takwas, har ma 17.5% na"kattaia cikin binciken kimiyya ya kai fiye da sa'o'i 11. Don haka ta yaya kuke samun lokaci don tsaftace kwalabe na gilashin da aka yi amfani da su a cikin gwaje-gwajen rana? Yadda za a tabbatar da cewa bayan kwana na bincike mai zurfi na kimiyya, kwalabe da jita-jita da aka wanke za su iya kaiwa matakin tsaftacewa, don kada su shafi gwaji na gaba?

Sanya goga da kwalbar da ke hannunka, kashe famfon, sannan ka kalli mai wankin kwalbar, za ka yi nadamar rashin amfani da injin wanki da wuri!

cdfdgv

01 Modular ƙirar ƙira ta kyauta

csddfs

Tambaya: Muna da nau'ikan kwalabe na dakin gwaje-gwaje iri-iri, kamar flasks volumetric, beakers, samfurin allura vials, da sauransu.Wanke Gilashin atomatiksaduwa da waɗannan buƙatun tsaftacewa a lokaci guda?

Amsa: Hakika, daLaboratory Glassware Washeryana ɗaukar ƙira na zamani. Za a iya maye gurbin tsarin tsaftacewa ba bisa ka'ida ba bisa ga nau'in kwalabe da za a tsaftace, kuma don yanayi daban-daban na tsaftacewa, tsarin yana da shirye-shirye 35 da aka gina da kuma ɗaruruwan shirye-shirye na musamman. Shirin zai iya cimma duk abin da kuke so, tare da haɗin kai kyauta.

02 Haɗin hannu na fesa da bututun allura ɗaya zuwa ɗaya don tsaftacewa ba tare da mataccen kusurwa ba

cdsfds

Tambaya: Menene hanyar tsaftacewa naInjin Tsabtace Glassware? Kuma ta yaya ake tabbatar da tsafta?

A: The babba da ƙananan ɗakuna suna sanye take da biyu 360 ° jujjuya feshi makamai don tsaftace m surface na kwalban, da daya-zuwa daya allura nozzles ana amfani da su tsaftace ciki surface na kwalban, don cimma duk- zagaye tsaftacewa na ciki da waje na kwalban. . Ta yaya za ku tabbatar da cewa za a iya tsaftace shi? Tsarin tsaftacewa ya haɗa da wanke-wanke, alkali babban wankewa, tsaka-tsakin acid, tsaftace ruwa mai tsabta, tsarin kulawa na zaɓi na zaɓi da tsarin bugawa, samar da bayanan lokaci na ainihi, don gane ingantaccen tsaftacewa na kwalabe da jita-jita da rikodin bayanai da kuma ganowa.

03 Ikon na'ura mai kwakwalwa da fasaha na gano kwandon yana adana farashin tsaftacewa sosai

Tambaya: Irin wannan babban injin dole ne ya kasance mai tsada sosai a ruwa da wutar lantarki, daidai ne?

Amsa: Bayan an auna ƙwararru, sakamakon shine kamar haka (lokacin da ɗaruruwan kwalabe suka cika):

1. Amfani da wutar lantarki (zazzabi na ruwa ba ƙasa da 15 ℃):

Yanayin daidaitaccen: amfani da wutar lantarki shine 3.12 kWh, a 1.00 yuan / kWh, farashin shine yuan 3.12;

Yanayin wanki na duniya: yawan wutar lantarki shine digiri 4.25, bisa ga yuan / digiri 1.00, farashin shine yuan 4.25.

2. Cin Ruwa:

Daidaitaccen yanayin tsaftacewa: 40L, a 2.75 yuan / ton, farashin shine yuan 0.11; (wanda aka lissafta gaba daya ta hanyar ruwan famfo)

Yanayin tsaftacewa gabaɗaya: 60L, a yuan 2.75 / ton, farashin shine yuan 0.165; (ana lissafta gaba ɗaya ta ruwan famfo)

3. Wakilin tsaftacewa:

Kimanin yuan 9 don tsaftacewa ɗaya

4. Takaitaccen farashi:

Daidaitaccen tsaftacewa, kowane lokaci shine 3.12 + 0.11 + 9.00 = 12.23 yuan / lokaci;

Tsabtace gabaɗaya, kowane lokaci shine 4.25+0.165+9.00=13.415 yuan/lokaci

Idan aka kwatanta da tsaftacewa ta hannu, ana iya ajiye kuɗin tsabtace injin da kusan 1/2.

04 bushewa a cikin wurin da aikin buɗe kofa ta atomatik yana haskaka ƙirar ɗan adam

gfhfg

Tambaya: Shin kawai tsaftacewa ne? Akwai wasu siffofi masu haske?

Amsa: Domin saduwa da bukatun masu amfani waɗanda suke buƙatar bushewa bayan tsaftacewa, kayan aikin za a iya sanye su da aikin bushewa a cikin wurin. Bayan tsaftacewa, zai iya shigar da shirin bushewa ta atomatik kamar yadda ake buƙata, kuma an sanye shi da auduga mai tace HEPA mai Layer Layer don ƙara tabbatar da bushewa. Tsaftar iska a cikin tsari. Bayan tsaftacewa da bushewa, ta hanyar fasahar shigar da ITL, ƙofar za ta buɗe ta atomatik zuwa wani matsayi na minti ɗaya, rage yawan zafin jiki a cikin rami bayan tsaftacewa da bushewa. Hana ma'aikata daga ƙonewa da iska mai zafi, yana nuna ƙirar ɗan adam.

taƙaitawa

Hanyar bincike na kimiyya tana da tsayi, kuma Mai Wanke Gilashin Gilashin atomatik yana nan!


Lokacin aikawa: Afrilu-18-2022